About this item
- The 2.4G remote control is suitable for Haswing 50700-V18, 50718D-V08, 50706-V03 version trolling motors. Kindly double check the serial number before purchasing. The serial number for the bow mount trolling motor (50700/50718D) is located on the inside of the side door in the mounting position, for the transom trolling motor(50706) is located on the mounting bracket. If the trolling motor version is not 50700-V18, 50718D-V08, 50706-V03, please choose the 433HZ wireless remote control.
- After replacing a new remote control, it is necessary to pair the newly 2.4G remote control with the trolling motor, and then re-pair the original wireless foot control with the trolling motor via the new wireless remote control before continue to use the wireless foot control.
- Pairing the Remote to the Motor: The "Pairing" button on the new 2.4G wireless remote is the same button as the "Turtle" (speed down) button, Please press and hold the "magnifying glass" button below the power status lights on the motor and the "Turtle" button on the remote at the same time for 3 seconds or until you hear 3 beeps to indicate a successful connection. Release both buttons, the remote and motor are paired successfully.
- The remote control is charged via the USB charging cable. The indicator light is red during charging and turns green when fully charged. It’s recommended to use a 5V 500mA charger (charger not included).
- Compact and easy to hold, the remote can also be worn with a lanyard. Conveniently control the motor on the boat or shoreside with the farthest 164 ft distance.
- Compact and easy to hold, the remote can also be worn with a lanyard. Conveniently control the motor on the boat or shoreside with the farthest 164 ft distance.
Product Description
AQUOS 2.4G Version Remote Control for Haswing 50700/50718D/50706 Trolling Motor
- The 2.4G remote control is suitable for Haswing 50700-V18, 50718D-V08, 50706-V03 version trolling motors. Kindly double check the serial number before purchasing.
- Conveniently control the motor on the boat or shoreside with the farthest 164 ft distance.
- Support 10 gear speed adjustment and 360° rotation to ensure boats can travel smoothly in different waters.
- Advanced wireless technology provides reliable remote control, even on large vessels or floating platforms.
- The remote control fits into the palm of your hand easily or can be attached around your neck with a lanyard.
Pairing remote to motor
The "Pairing" button on the new 2.4G wireless remote is the same button as the "Turtle" (speed down) button, Please press and hold the "magnifying glass" button below the power status lights on the motor and the "Turtle" button on the remote at the same time for 3 seconds or until you hear 3 beeps to indicate a successful connection.
Release both buttons, the remote and motor are paired successfully.
Mode Signal Light
- Press the "ON" button, and the indicator light will either stay solid, indicating the remote is in standby mode.
- Press any button on the remote control and the red indicator light will flash to indicate that a signal is being sent.
- Press the "OFF" button to turn off the remote; the light will turn off.
Operating the Trolling Motor
- To activate the trolling motor, make sure the remote is in "ON" state, then press the central "Propeller" button.
- Press the "Rabbit" button to increase speed.
- Adjust the speed during use by pressing the "Rabbit" or "Turtle" buttons.
Charged via the USB charging cable
- The indicator light is red during charging and turns green when fully charged.
- It’s recommended to use a 5V 500mA charger (charger not included).